QTest Device Emulation Testing Framework

QTest is a device emulation testing framework. It can be very useful to test device models; it could also control certain aspects of QEMU (such as virtual clock stepping), with a special purpose “qtest” protocol. Refer to QTest Protocol for more details of the protocol.

QTest cases can be executed with

make check-qtest

The QTest library is implemented by tests/qtest/libqtest.c and the API is defined in tests/qtest/libqtest.h.

Consider adding a new QTest case when you are introducing a new virtual hardware, or extending one if you are adding functionalities to an existing virtual device.

On top of libqtest, a higher level library, libqos, was created to encapsulate common tasks of device drivers, such as memory management and communicating with system buses or devices. Many virtual device tests use libqos instead of directly calling into libqtest. Libqos also offers the Qgraph API to increase each test coverage and automate QEMU command line arguments and devices setup. Refer to Qtest Driver Framework for Qgraph explanation and API.

Steps to add a new QTest case are:

  1. Create a new source file for the test. (More than one file can be added as necessary.) For example, tests/qtest/foo-test.c.

  2. Write the test code with the glib and libqtest/libqos API. See also existing tests and the library headers for reference.

  3. Register the new test in tests/qtest/meson.build. Add the test executable name to an appropriate qtests_* variable. There is one variable per architecture, plus qtests_generic for tests that can be run for all architectures. For example:

    qtests_generic = [
      ...
      'foo-test',
      ...
    ]
    
  4. If the test has more than one source file or needs to be linked with any dependency other than qemuutil and qos, list them in the qtests dictionary. For example a test that needs to use the QIO library will have an entry like:

    {
      ...
      'foo-test': [io],
      ...
    }
    

Debugging a QTest failure is slightly harder than the unit test because the tests look up QEMU program names in the environment variables, such as QTEST_QEMU_BINARY and QTEST_QEMU_IMG, and also because it is not easy to attach gdb to the QEMU process spawned from the test. But manual invoking and using gdb on the test is still simple to do: find out the actual command from the output of

make check-qtest V=1

which you can run manually.

QTest Protocol

Line based protocol, request/response based. Server can send async messages so clients should always handle many async messages before the response comes in.

Valid requests

Clock management:

The qtest client is completely in charge of the QEMU_CLOCK_VIRTUAL. qtest commands let you adjust the value of the clock (monotonically). All the commands return the current value of the clock in nanoseconds.

> clock_step
< OK VALUE

Advance the clock to the next deadline. Useful when waiting for asynchronous events.

> clock_step NS
< OK VALUE

Advance the clock by NS nanoseconds.

> clock_set NS
< OK VALUE

Advance the clock to NS nanoseconds (do nothing if it’s already past).

PIO and memory access:

> outb ADDR VALUE
< OK
> outw ADDR VALUE
< OK
> outl ADDR VALUE
< OK
> inb ADDR
< OK VALUE
> inw ADDR
< OK VALUE
> inl ADDR
< OK VALUE
> writeb ADDR VALUE
< OK
> writew ADDR VALUE
< OK
> writel ADDR VALUE
< OK
> writeq ADDR VALUE
< OK
> readb ADDR
< OK VALUE
> readw ADDR
< OK VALUE
> readl ADDR
< OK VALUE
> readq ADDR
< OK VALUE
> read ADDR SIZE
< OK DATA
> write ADDR SIZE DATA
< OK
> b64read ADDR SIZE
< OK B64_DATA
> b64write ADDR SIZE B64_DATA
< OK
> memset ADDR SIZE VALUE
< OK

ADDR, SIZE, VALUE are all integers parsed with strtoul() with a base of 0. For ‘memset’ a zero size is permitted and does nothing.

DATA is an arbitrarily long hex number prefixed with ‘0x’. If it’s smaller than the expected size, the value will be zero filled at the end of the data sequence.

B64_DATA is an arbitrarily long base64 encoded string. If the sizes do not match, the data will be truncated.

IRQ management:

> irq_intercept_in QOM-PATH
< OK
> irq_intercept_out QOM-PATH
< OK

Attach to the gpio-in (resp. gpio-out) pins exported by the device at QOM-PATH. When the pin is triggered, one of the following async messages will be printed to the qtest stream:

IRQ raise NUM
IRQ lower NUM

where NUM is an IRQ number. For the PC, interrupts can be intercepted simply with “irq_intercept_in ioapic” (note that IRQ0 comes out with NUM=0 even though it is remapped to GSI 2).

Setting interrupt level:

> set_irq_in QOM-PATH NAME NUM LEVEL
< OK

where NAME is the name of the irq/gpio list, NUM is an IRQ number and LEVEL is an signed integer IRQ level.

Forcibly set the given interrupt pin to the given level.

libqtest API reference

QTestState * qtest_initf(const char *fmt, ...)

Parameters

const char *fmt
Format for creating other arguments to pass to QEMU, formatted like sprintf().
...
variable arguments

Description

Convenience wrapper around qtest_init().

Return

QTestState instance.

QTestState * qtest_vinitf(const char *fmt, va_list ap)

Parameters

const char *fmt
Format for creating other arguments to pass to QEMU, formatted like vsprintf().
va_list ap
Format arguments.

Description

Convenience wrapper around qtest_init().

Return

QTestState instance.

QTestState * qtest_init(const char *extra_args)

Parameters

const char *extra_args
other arguments to pass to QEMU. CAUTION: these arguments are subject to word splitting and shell evaluation.

Return

QTestState instance.

QTestState * qtest_init_without_qmp_handshake(const char *extra_args)

Parameters

const char *extra_args
other arguments to pass to QEMU. CAUTION: these arguments are subject to word splitting and shell evaluation.

Return

QTestState instance.

QTestState * qtest_init_with_serial(const char *extra_args, int *sock_fd)

Parameters

const char *extra_args
other arguments to pass to QEMU. CAUTION: these arguments are subject to word splitting and shell evaluation.
int *sock_fd
pointer to store the socket file descriptor for connection with serial.

Return

QTestState instance.

void qtest_kill_qemu(QTestState *s)

Parameters

QTestState *s
QTestState instance to operate on.

Description

Kill the QEMU process and wait for it to terminate. It is safe to call this function multiple times. Normally qtest_quit() is used instead because it also frees QTestState. Use qtest_kill_qemu() when you just want to kill QEMU and qtest_quit() will be called later.

void qtest_quit(QTestState *s)

Parameters

QTestState *s
QTestState instance to operate on.

Description

Shut down the QEMU process associated to s.

QDict * qtest_qmp_fds(QTestState *s, int *fds, size_t fds_num, const char *fmt, ...)

Parameters

QTestState *s
QTestState instance to operate on.
int *fds
array of file descriptors
size_t fds_num
number of elements in fds
const char *fmt
QMP message to send to qemu, formatted like qobject_from_jsonf_nofail(). See parse_interpolation() for what’s supported after ‘%’.
...
variable arguments

Description

Sends a QMP message to QEMU with fds and returns the response.

QDict * qtest_qmp(QTestState *s, const char *fmt, ...)

Parameters

QTestState *s
QTestState instance to operate on.
const char *fmt
QMP message to send to qemu, formatted like qobject_from_jsonf_nofail(). See parse_interpolation() for what’s supported after ‘%’.
...
variable arguments

Description

Sends a QMP message to QEMU and returns the response.

void qtest_qmp_send(QTestState *s, const char *fmt, ...)

Parameters

QTestState *s
QTestState instance to operate on.
const char *fmt
QMP message to send to qemu, formatted like qobject_from_jsonf_nofail(). See parse_interpolation() for what’s supported after ‘%’.
...
variable arguments

Description

Sends a QMP message to QEMU and leaves the response in the stream.

void qtest_qmp_send_raw(QTestState *s, const char *fmt, ...)

Parameters

QTestState *s
QTestState instance to operate on.
const char *fmt
text to send, formatted like sprintf()
...
variable arguments

Description

Sends text to the QMP monitor verbatim. Need not be valid JSON; this is useful for negative tests.

int qtest_socket_server(const char *socket_path)

Parameters

const char *socket_path
the UNIX domain socket path

Description

Create and return a listen socket file descriptor, or abort on failure.

QDict * qtest_vqmp_fds(QTestState *s, int *fds, size_t fds_num, const char *fmt, va_list ap)

Parameters

QTestState *s
QTestState instance to operate on.
int *fds
array of file descriptors
size_t fds_num
number of elements in fds
const char *fmt
QMP message to send to QEMU, formatted like qobject_from_jsonf_nofail(). See parse_interpolation() for what’s supported after ‘%’.
va_list ap
QMP message arguments

Description

Sends a QMP message to QEMU with fds and returns the response.

QDict * qtest_vqmp(QTestState *s, const char *fmt, va_list ap)

Parameters

QTestState *s
QTestState instance to operate on.
const char *fmt
QMP message to send to QEMU, formatted like qobject_from_jsonf_nofail(). See parse_interpolation() for what’s supported after ‘%’.
va_list ap
QMP message arguments

Description

Sends a QMP message to QEMU and returns the response.

void qtest_qmp_vsend_fds(QTestState *s, int *fds, size_t fds_num, const char *fmt, va_list ap)

Parameters

QTestState *s
QTestState instance to operate on.
int *fds
array of file descriptors
size_t fds_num
number of elements in fds
const char *fmt
QMP message to send to QEMU, formatted like qobject_from_jsonf_nofail(). See parse_interpolation() for what’s supported after ‘%’.
va_list ap
QMP message arguments

Description

Sends a QMP message to QEMU and leaves the response in the stream.

void qtest_qmp_vsend(QTestState *s, const char *fmt, va_list ap)

Parameters

QTestState *s
QTestState instance to operate on.
const char *fmt
QMP message to send to QEMU, formatted like qobject_from_jsonf_nofail(). See parse_interpolation() for what’s supported after ‘%’.
va_list ap
QMP message arguments

Description

Sends a QMP message to QEMU and leaves the response in the stream.

QDict * qtest_qmp_receive_dict(QTestState *s)

Parameters

QTestState *s
QTestState instance to operate on.

Description

Reads a QMP message from QEMU and returns the response.

QDict * qtest_qmp_receive(QTestState *s)

Parameters

QTestState *s
QTestState instance to operate on.

Description

Reads a QMP message from QEMU and returns the response. Buffers all the events received meanwhile, until a call to qtest_qmp_eventwait

void qtest_qmp_eventwait(QTestState *s, const char *event)

Parameters

QTestState *s
QTestState instance to operate on.
const char *event
event to wait for.

Description

Continuously polls for QMP responses until it receives the desired event.

QDict * qtest_qmp_eventwait_ref(QTestState *s, const char *event)

Parameters

QTestState *s
QTestState instance to operate on.
const char *event
event to wait for.

Description

Continuously polls for QMP responses until it receives the desired event. Returns a copy of the event for further investigation.

QDict * qtest_qmp_event_ref(QTestState *s, const char *event)

Parameters

QTestState *s
QTestState instance to operate on.
const char *event
event to return.

Description

Removes non-matching events from the buffer that was set by qtest_qmp_receive, until an event bearing the given name is found, and returns it. If no event matches, clears the buffer and returns NULL.

char * qtest_hmp(QTestState *s, const char *fmt, ...)

Parameters

QTestState *s
QTestState instance to operate on.
const char *fmt
HMP command to send to QEMU, formats arguments like sprintf().
...
variable arguments

Description

Send HMP command to QEMU via QMP’s human-monitor-command. QMP events are discarded.

Return

the command’s output. The caller should g_free() it.

char * qtest_vhmp(QTestState *s, const char *fmt, va_list ap)

Parameters

QTestState *s
QTestState instance to operate on.
const char *fmt
HMP command to send to QEMU, formats arguments like vsprintf().
va_list ap
HMP command arguments

Description

Send HMP command to QEMU via QMP’s human-monitor-command. QMP events are discarded.

Return

the command’s output. The caller should g_free() it.

bool qtest_get_irq(QTestState *s, int num)

Parameters

QTestState *s
QTestState instance to operate on.
int num
Interrupt to observe.

Return

The level of the num interrupt.

void qtest_irq_intercept_in(QTestState *s, const char *string)

Parameters

QTestState *s
QTestState instance to operate on.
const char *string
QOM path of a device.

Description

Associate qtest irqs with the GPIO-in pins of the device whose path is specified by string.

void qtest_irq_intercept_out(QTestState *s, const char *string)

Parameters

QTestState *s
QTestState instance to operate on.
const char *string
QOM path of a device.

Description

Associate qtest irqs with the GPIO-out pins of the device whose path is specified by string.

void qtest_set_irq_in(QTestState *s, const char *string, const char *name, int irq, int level)

Parameters

QTestState *s
QTestState instance to operate on.
const char *string
QOM path of a device
const char *name
IRQ name
int irq
IRQ number
int level
IRQ level

Description

Force given device/irq GPIO-in pin to the given level.

void qtest_outb(QTestState *s, uint16_t addr, uint8_t value)

Parameters

QTestState *s
QTestState instance to operate on.
uint16_t addr
I/O port to write to.
uint8_t value
Value being written.

Description

Write an 8-bit value to an I/O port.

void qtest_outw(QTestState *s, uint16_t addr, uint16_t value)

Parameters

QTestState *s
QTestState instance to operate on.
uint16_t addr
I/O port to write to.
uint16_t value
Value being written.

Description

Write a 16-bit value to an I/O port.

void qtest_outl(QTestState *s, uint16_t addr, uint32_t value)

Parameters

QTestState *s
QTestState instance to operate on.
uint16_t addr
I/O port to write to.
uint32_t value
Value being written.

Description

Write a 32-bit value to an I/O port.

uint8_t qtest_inb(QTestState *s, uint16_t addr)

Parameters

QTestState *s
QTestState instance to operate on.
uint16_t addr
I/O port to read from.

Description

Returns an 8-bit value from an I/O port.

uint16_t qtest_inw(QTestState *s, uint16_t addr)

Parameters

QTestState *s
QTestState instance to operate on.
uint16_t addr
I/O port to read from.

Description

Returns a 16-bit value from an I/O port.

uint32_t qtest_inl(QTestState *s, uint16_t addr)

Parameters

QTestState *s
QTestState instance to operate on.
uint16_t addr
I/O port to read from.

Description

Returns a 32-bit value from an I/O port.

void qtest_writeb(QTestState *s, uint64_t addr, uint8_t value)

Parameters

QTestState *s
QTestState instance to operate on.
uint64_t addr
Guest address to write to.
uint8_t value
Value being written.

Description

Writes an 8-bit value to memory.

void qtest_writew(QTestState *s, uint64_t addr, uint16_t value)

Parameters

QTestState *s
QTestState instance to operate on.
uint64_t addr
Guest address to write to.
uint16_t value
Value being written.

Description

Writes a 16-bit value to memory.

void qtest_writel(QTestState *s, uint64_t addr, uint32_t value)

Parameters

QTestState *s
QTestState instance to operate on.
uint64_t addr
Guest address to write to.
uint32_t value
Value being written.

Description

Writes a 32-bit value to memory.

void qtest_writeq(QTestState *s, uint64_t addr, uint64_t value)

Parameters

QTestState *s
QTestState instance to operate on.
uint64_t addr
Guest address to write to.
uint64_t value
Value being written.

Description

Writes a 64-bit value to memory.

uint8_t qtest_readb(QTestState *s, uint64_t addr)

Parameters

QTestState *s
QTestState instance to operate on.
uint64_t addr
Guest address to read from.

Description

Reads an 8-bit value from memory.

Return

Value read.

uint16_t qtest_readw(QTestState *s, uint64_t addr)

Parameters

QTestState *s
QTestState instance to operate on.
uint64_t addr
Guest address to read from.

Description

Reads a 16-bit value from memory.

Return

Value read.

uint32_t qtest_readl(QTestState *s, uint64_t addr)

Parameters

QTestState *s
QTestState instance to operate on.
uint64_t addr
Guest address to read from.

Description

Reads a 32-bit value from memory.

Return

Value read.

uint64_t qtest_readq(QTestState *s, uint64_t addr)

Parameters

QTestState *s
QTestState instance to operate on.
uint64_t addr
Guest address to read from.

Description

Reads a 64-bit value from memory.

Return

Value read.

void qtest_memread(QTestState *s, uint64_t addr, void *data, size_t size)

Parameters

QTestState *s
QTestState instance to operate on.
uint64_t addr
Guest address to read from.
void *data
Pointer to where memory contents will be stored.
size_t size
Number of bytes to read.

Description

Read guest memory into a buffer.

uint64_t qtest_rtas_call(QTestState *s, const char *name, uint32_t nargs, uint64_t args, uint32_t nret, uint64_t ret)

Parameters

QTestState *s
QTestState instance to operate on.
const char *name
name of the command to call.
uint32_t nargs
Number of args.
uint64_t args
Guest address to read args from.
uint32_t nret
Number of return value.
uint64_t ret
Guest address to write return values to.

Description

Call an RTAS function

void qtest_bufread(QTestState *s, uint64_t addr, void *data, size_t size)

Parameters

QTestState *s
QTestState instance to operate on.
uint64_t addr
Guest address to read from.
void *data
Pointer to where memory contents will be stored.
size_t size
Number of bytes to read.

Description

Read guest memory into a buffer and receive using a base64 encoding.

void qtest_memwrite(QTestState *s, uint64_t addr, const void *data, size_t size)

Parameters

QTestState *s
QTestState instance to operate on.
uint64_t addr
Guest address to write to.
const void *data
Pointer to the bytes that will be written to guest memory.
size_t size
Number of bytes to write.

Description

Write a buffer to guest memory.

void qtest_bufwrite(QTestState *s, uint64_t addr, const void *data, size_t size)

Parameters

QTestState *s
QTestState instance to operate on.
uint64_t addr
Guest address to write to.
const void *data
Pointer to the bytes that will be written to guest memory.
size_t size
Number of bytes to write.

Description

Write a buffer to guest memory and transmit using a base64 encoding.

void qtest_memset(QTestState *s, uint64_t addr, uint8_t patt, size_t size)

Parameters

QTestState *s
QTestState instance to operate on.
uint64_t addr
Guest address to write to.
uint8_t patt
Byte pattern to fill the guest memory region with.
size_t size
Number of bytes to write.

Description

Write a pattern to guest memory.

int64_t qtest_clock_step_next(QTestState *s)

Parameters

QTestState *s
QTestState instance to operate on.

Description

Advance the QEMU_CLOCK_VIRTUAL to the next deadline.

Return

The current value of the QEMU_CLOCK_VIRTUAL in nanoseconds.

int64_t qtest_clock_step(QTestState *s, int64_t step)

Parameters

QTestState *s
QTestState instance to operate on.
int64_t step
Number of nanoseconds to advance the clock by.

Description

Advance the QEMU_CLOCK_VIRTUAL by step nanoseconds.

Return

The current value of the QEMU_CLOCK_VIRTUAL in nanoseconds.

int64_t qtest_clock_set(QTestState *s, int64_t val)

Parameters

QTestState *s
QTestState instance to operate on.
int64_t val
Nanoseconds value to advance the clock to.

Description

Advance the QEMU_CLOCK_VIRTUAL to val nanoseconds since the VM was launched.

Return

The current value of the QEMU_CLOCK_VIRTUAL in nanoseconds.

bool qtest_big_endian(QTestState *s)

Parameters

QTestState *s
QTestState instance to operate on.

Return

True if the architecture under test has a big endian configuration.

const char * qtest_get_arch(void)

Parameters

void
no arguments

Return

The architecture for the QEMU executable under test.

void qtest_add_func(const char *str, void (*fn)(void))

Parameters

const char *str
Test case path.
void (*fn)(void)
Test case function

Description

Add a GTester testcase with the given name and function. The path is prefixed with the architecture under test, as returned by qtest_get_arch().

void qtest_add_data_func(const char *str, const void *data, void (*fn)(const void *))

Parameters

const char *str
Test case path.
const void *data
Test case data
void (*fn)(const void *)
Test case function

Description

Add a GTester testcase with the given name, data and function. The path is prefixed with the architecture under test, as returned by qtest_get_arch().

void qtest_add_data_func_full(const char *str, void *data, void (*fn)(const void *), GDestroyNotify data_free_func)

Parameters

const char *str
Test case path.
void *data
Test case data
void (*fn)(const void *)
Test case function
GDestroyNotify data_free_func
GDestroyNotify for data

Description

Add a GTester testcase with the given name, data and function. The path is prefixed with the architecture under test, as returned by qtest_get_arch().

data is passed to data_free_func() on test completion.

qtest_add(testpath, Fixture, tdata, fsetup, ftest, fteardown)

Parameters

testpath
Test case path
Fixture
Fixture type
tdata
Test case data
fsetup
Test case setup function
ftest
Test case function
fteardown
Test case teardown function

Description

Add a GTester testcase with the given name, data and functions. The path is prefixed with the architecture under test, as returned by qtest_get_arch().

void qtest_add_abrt_handler(GHookFunc fn, const void *data)

Parameters

GHookFunc fn
Handler function
const void *data
Argument that is passed to the handler

Description

Add a handler function that is invoked on SIGABRT. This can be used to terminate processes and perform other cleanup. The handler can be removed with qtest_remove_abrt_handler().

void qtest_remove_abrt_handler(void *data)

Parameters

void *data
Argument previously passed to qtest_add_abrt_handler()

Description

Remove an abrt handler that was previously added with qtest_add_abrt_handler().

void qtest_qmp_assert_success(QTestState *qts, const char *fmt, ...)

Parameters

QTestState *qts
QTestState instance to operate on
const char *fmt
QMP message to send to qemu, formatted like qobject_from_jsonf_nofail(). See parse_interpolation() for what’s supported after ‘%’.
...
variable arguments

Description

Sends a QMP message to QEMU and asserts that a ‘return’ key is present in the response.

void qtest_cb_for_every_machine(void (*cb)(const char *machine), bool skip_old_versioned)

Parameters

void (*cb)(const char *machine)
Pointer to the callback function
bool skip_old_versioned

true if versioned old machine types should be skipped

Call a callback function for every name of all available machines.

void qtest_qmp_device_add_qdict(QTestState *qts, const char *drv, const QDict *arguments)

Parameters

QTestState *qts
QTestState instance to operate on
const char *drv
Name of the device that should be added
const QDict *arguments
QDict with properties for the device to intialize

Description

Generic hot-plugging test via the device_add QMP command with properties supplied in form of QDict. Use NULL for empty properties list.

void qtest_qmp_device_add(QTestState *qts, const char *driver, const char *id, const char *fmt, ...)

Parameters

QTestState *qts
QTestState instance to operate on
const char *driver
Name of the device that should be added
const char *id
Identification string
const char *fmt
QMP message to send to qemu, formatted like qobject_from_jsonf_nofail(). See parse_interpolation() for what’s supported after ‘%’.
...
variable arguments

Description

Generic hot-plugging test via the device_add QMP command.

void qtest_qmp_device_del(QTestState *qts, const char *id)

Parameters

QTestState *qts
QTestState instance to operate on
const char *id
Identification string

Description

Generic hot-unplugging test via the device_del QMP command.

bool qmp_rsp_is_err(QDict *rsp)

Parameters

QDict *rsp
QMP response to check for error

Description

Test rsp for error and discard rsp. Returns ‘true’ if there is error in rsp and ‘false’ otherwise.

void qmp_expect_error_and_unref(QDict *rsp, const char *class)

Parameters

QDict *rsp
QMP response to check for error
const char *class
an error class

Description

Assert the response has the given error class and discard rsp.

bool qtest_probe_child(QTestState *s)

Parameters

QTestState *s
QTestState instance to operate on.

Return

true if the child is still alive.

void qtest_set_expected_status(QTestState *s, int status)

Parameters

QTestState *s
QTestState instance to operate on.
int status
an expected exit status.

Description

Set expected exit status of the child.